Rotary Damper With Spring
Xiamen Sunled offers chinese rotary steering damper, incuding high speed rotary damper and high torque rotary damper. We not only offer rotary damper for toilet seat, automatci toiler seat, but also offer rotary gear damper for smart home, auto mobile etc.
Rotary Electric Damper for Toilet Seat
1.Scope
This rotary electric damper（SLD-3) is designed for the automatic hinge of intelligent toilet lids and seats, enabling full automation of opening and closing. This configuration manual provides instructions on the performance and usage conditions of the electric damper.
Quantity of Application: One unit is used for each toilet lid/seat.
2.Specification
Item | Spec. | Remark |
Rated Voltage | DC12V |
|
Power Consumption | 12W Max |
|
Operating Temperature | 0°C~40°C | Ice free& Dew Free |
Storage Temperature | -10°C~50°C | Ice free& Dew Free |
Operating Humidity | 45~85%RH | Ice free& Dew Free |
Operation Angle | 0°~120° |
|
Rotation Direction | CW | R: CLOSE, L:OPEN DIRECTION |
Load Reversal Direction Load Reversal Direction | CCW | From the output shaft direction |
Output Torque (Rated Load) | 3.6N·m or more | CCW |
Mechanical Strength (strength of output shaft and mounting components)
| The output shaft and mounting components must not be subjected to external forces exceeding 5 N·m | CCW
|
Motor Type | DC MOTOR |
3.Basic Performance
Item | Spec. | Remark | ||
Insulation Class | Classs A |
| ||
Driving Voltage | DC12V±20% |
| ||
Operating Current | 2.2A or less | Max Current of Motor | ||
No-load Rotation Speed | 19.5RPM |
| ||
Open Time | 3.5sec Max | Rated Load, CCW、Duty100% | ||
Close Time | 1sec Min | meet the combined SET control conditions
| ||
Signal Part Voltage | DC5V±5% |
| ||
Signal Output Circuit | Extracted through voltage division with a variable resistor | Total resistance of the variable resistor 10kQ±30% | ||
Driving Circuit | No | Color | Wiring | SET Necessary conditions for control program: 1.Detection of abnormal load: Power should be cut off if abnormal torque (TORQUE) is detected after the switch is turned on. 2.Drive speed control: Implement deceleration before full opening to prevent impact noise. |
1 | Red | MOTOR(-) | ||
2 | Black | MOTOR(+) | ||
3 | Blue | GND | ||
4 | White | OUTPUT | ||
5 | Yellow | Vcc: DC5V | ||
Output Signal | Closed Position 0°:0.5±0.5V | DC5V, including gear mesh clearance | ||
For more information, please download the attachment!
